Oct 2026· ACS Applied Materials and Interfaces· 0 citations· 49 references
Medicine
Abstract
Artificial interfacial layers on Zn anodes are a promising route for stabilizing alkaline Zn-Ni batteries, but their practical effectiveness is often limited by a trade-off between suppressing water-induced parasitic reactions and maintaining rapid Zn-containing species transport. Herein, a hydrophobic-hydrophilic gradient composite layer is developed on a Zn substrate through sequential perfluorooctyltrichlorosilane (PFOTS) modification followed by crosslinked polyvinyl alcohol (PVA) coating. This gradient interphase couples a buried hydrophobic PFOTS layer with an outer hydrophilic PVA layer, thereby balancing water shielding, electrolyte affinity, mechanical compliance, and Zn-containing species transport at the Zn/electrolyte interface. As a result, the symmetric cell based on PFOTS/PVA-modified Zn (ZP) delivers stable cycling for 1200 h at 1 mA cm-2 and 1 mAh cm-2. When coupled with a Ni(OH)2-based cathode, the resulting alkaline Zn-Ni full cell exhibits an output voltage of ≈1.77 V, retains 93.2% of its capacity after resting for 48 h, sustains stable operation for more than 1100 h at 1 C, and maintains durable cycling over 1500 cycles at 2 C. This work demonstrates that wettability-gradient interfacial engineering can reconcile water regulation, Zn-containing species transport, and mechanical compliance for durable alkaline Zn anodes.
The development of aqueous zinc batteries is critically constrained by the electrode-electrolyte interfacial instability at the Zn anode. Herein, a zwitterionic dynamic buffering interface (ZDBI) is constructed by using trace glufosinate ammonium (GA). The dissociated GA- anchors onto the Zn(101) surface via its phosph...
Aqueous zinc batteries (AZBs) are promising for large-scale and safe energy storage, yet their practical application is hindered by dendrite growth, corrosion, and parasitic side reactions on Zn anodes. Herein, a high-modulus, charge-rich interfacial layer is constructed through electrostatic coupling of poly(2-acrylam...
Han Tian, Hao Wu, Yi Ding et al.· Journal of the American Chem...· 0 citations
Aqueous zinc batteries hold promise for energy storage, but viability is limited by the trade-off between interfacial thermodynamic stability and Zn2+ deposition kinetics. Existing strategies address solvation or electric-field regulation separately, overlooking the coupled interplay between molecular adsorption and io...
Wei-Jia Meng, Jia-Yue Gao, Xiao-Yan Qiang et al.· Journal of Physical Chemistr...· 0 citations
Aqueous zinc metal batteries are promising for safe and low-cost energy storages, but their practical operation is limited by unstable Zn/electrolyte interfacial reactions, sluggish Zn2+ transport, parasitic hydrogen evolution reaction (HER), and dendritic growth. Here, we report a strategy of constructing a dual-funct...
The development of aqueous zinc metal batteries (AZMBs) is impeded by their limited lifespan, especially at extreme conditions (high current, low temperature etc.), primarily because the solid electrolyte interphase (SEI) on Zn anode cannot simultaneously balance the solvation/desolvation kinetics and deposition/stripp...
Kun Xu, Ru-Xia Han, Wei Gao et al.· Angewandte Chemie· 0 citations
Aqueous Zn-S batteries offer high theoretical energy density and intrinsic safety, but iodine-mediated sulfur conversion introduces severe chemical and electrochemical instability at Zn anode. Herein, life-cycle-resolved three-electrode measurements reveal that, although sulfur utilization gradually decreases, the rapi...