Aqueous zinc-ion hybrid capacitors (AZICs) possess outstanding advantages including inherent high safety, low manufacturing cost, and balanced energy-power performance. However, their practical application is frequently hindered by the sluggish electrochemical kinetics of cathode materials. In this work, we develop a facile hydrothermal approach to precisely manipulate the morphology of MnO2via reaction temperature adjustment, successfully synthesizing uniform one-dimensional δ-MnO2 nanofibers. The obtained material combines two beneficial characteristics synergistically: the layered crystal structure of δ-MnO2 enables reversible Zn2+ intercalation/deintercalation, while the fibrous architecture prevents face-to-face stacking of nanosheets, reduces ion diffusion distances, forms continuous conductive pathways, and exposes a large number of electrochemically active sites. When employed as the cathode paired with an activated carbon anode, the fabricated AZIC exhibits a specific capacitance of 139 F g-1 at 0.125 A g-1, maintains approximately 80% of its initial capacitance after 2000 charge-discharge cycles with 100% coulombic efficiency, and achieves a maximum energy density of 55.7 Wh kg-1. This study presents a straightforward morphology-regulation strategy for constructing high-performance cathode materials for AZICs.
Aqueous zinc-ion batteries (AZIBs) are considered promising for large-scale energy storage owing to their intrinsic safety, low cost, and environmental friendliness. α-MnO2, with its unique 2 × 2 tunnel structure, is regarded as one of the most promising cathode materials for zinc-ion batteries; however, its cycling st...
Huan Yu, Yu-Tong Jia, Min-Ting Liu et al.· International Journal of Mol...· 0 citations
Aqueous zinc batteries (AZBs) are promising for large-scale and safe energy storage, yet their practical application is hindered by dendrite growth, corrosion, and parasitic side reactions on Zn anodes. Herein, a high-modulus, charge-rich interfacial layer is constructed through electrostatic coupling of poly(2-acrylam...
Han Tian, Hao Wu, Yi Ding et al.· Journal of the American Chem...· 0 citations
Iron trifluoride (FeF3) is a promising conversion-type cathode material for next-generation lithium-ion batteries (LIBs) owing to its high theoretical capacity enabled by multielectron redox chemistry. However, its practical application is limited by sluggish reaction kinetics, large volume fluctuations, and unstable e...
Jia-Li Liu, Hui-Yi Zhou, Wan-De Song et al.· Nano letters (Print)· 0 citations
We use cookies to run the site and, with your consent, for analytics and to show ads.
See our Cookie Policy.