Skip to content

Tunable Polycaprolactone-Gelatin Methacryloyl Composites for Fused Deposition Modeling Musculoskeletal Scaffold Fabrication.

Oct 2026 · Journal of Biomedical Materials Research. Part A · Vol 114 11 · 0 citations · 29 references
Medicine

TL;DR

A novel synthesis of polycaprolactone-gelatin methacryloyl (PCL-GelMA) composite filament, compatible with standard fused deposition modeling (FDM) 3D printers, for scalable and customizable scaffold fabrication, and reveals nonlinear dependencies between GelMA content and tensile properties.

Abstract

The global musculoskeletal burden continues to outpace standard of care transplantation efforts and existing tissue engineering solutions, necessitating further development of scalable biomaterials. In this study, we introduce a novel synthesis of polycaprolactone-gelatin methacryloyl (PCL-GelMA) composite filament, compatible with standard fused deposition modeling (FDM) 3D printers, for scalable and customizable scaffold fabrication. By incorporating 15% and 30% (w/w) GelMA into a PCL matrix, we achieved tunable modulation of surface roughness, hydrophilicity, and degradation kinetics. Mechanical testing revealed nonlinear dependencies between GelMA content and tensile properties, suggesting that variation in GelMA particle size and distribution leads to a concentration-dependent trade-off between stiffness and structural integrity. Human mesenchymal stem cells (hMSCs) cultured on printed scaffolds maintained viability and proliferative capacity. By mitigating solvent toxicity through upstream processing, physically integrating constituents into a unified bulk matrix, and leveraging the accessibility of FDM printing, this material platform enables scalable translation and further biomaterial exploration.

View source

Similar papers

Open access Sep 2026

Fabrication of Aligned Polycaprolactone Nanofibrillar Bundles to Control Cell-Mediated Collagen Deposition in Engineered Cartilage

The structural anisotropy of collagen is essential for the function of tissues such as articular cartilage, yet current biofabrication strategies fail to reproduce this hierarchical organization. Melt electrowriting (MEW) is widely used to fabricate mechanically stable polycaprolactone (PCL) scaffolds for reinforcing h...

A. Moliner, Lennard Spauwen, James L. Martin Robinson et al. · 0 citations
Review Open access Oct 2026

Polysaccharide Bioinks for 3D Bioprinting: A Guide to Translation

Polysaccharide-based hydrogels offer versatile platforms for three-dimensional bioprinting, but translation requires coordinated assessment of formulation, processing, and biological performance. This narrative review connects backbone chemistry and functionalization with rheology, crosslinking, printing modality, cell...

Adrian Bibiș, A. Paraschiv, N. D. Batalu et al. · 0 citations
Review Open access Nov 2026

Functionalization of polycaprolactone scaffolds for tissue engineering: molecular cues, bioactive cell–material interfaces, and translational perspectives

Poly(ε-caprolactone) (PCL) has emerged as a promising scaffold material in regenerative medicine owing to its biodegradability, mechanical strength, and processability. However, its intrinsic hydrophobicity and lack of bioactive motifs restrict cell–material interactions and clinical translation. This review synthesize...

S. M. Hosseini, Masoumeh Zahmatkeshan, Khadijeh Falahzadeh et al. · 0 citations
Open access Oct 2026

Scalable Fabrication of Chemically Stabilized Gelatin Hydrogel Fibers by Thermal Drawing

Gelatin represents a promising hydrogel fiber matrix for drug delivery, tissue engineering, and neural interfaces due to its inherent biocompatibility, biodegradability, and mechanical adaptability. Yet, existing soft‐material fabrication methods typically constrain fiber length, aspect ratio, throughput, and structura...

Chao-Qun Dong, B. Schyrr, S. Laperrousaz et al. · 0 citations
Open access Oct 2026

Fabrication and Characterization of 3D-Printed Polylactide Composite Scaffolds with Modified Graphene

In this study, we introduce novel multifunctional biomaterial inks for extrusion-based 3D bioprinting to create scaffolds for potential tissue engineering. This study focuses on developing composite materials by incorporating alkyl ketene dimer (AKD)-modified graphene nanoplatelets (GP) into polylactide (PLA) using a s...

Worathep Khimlek, Jirawan Jindakeaw, V. Primpray et al. · 0 citations

We use cookies to run the site and, with your consent, for analytics and to show ads. See our Cookie Policy.