Sep 2026· International Journal of Innovative Science & Technology· 0 citations· 12 references
Abstract
The integration of Thermostatically Controlled Loads (TCLs) into the active power regulation framework of power systems provides a variety of benefits and multifarious uses. The TCLs specifically heating, ventilation, and air-conditioning (HVAC) systems constitutes the majority of the power demands in modern power systems for centralized building structures. This study investigates the utilization of an aggregated HVAC/TCL resource as a supplementary demand side reserve in a single-area load frequency control system that features a 250 MW coal-fired thermal generating unit. A 40 MW step-load disturbance is used to evaluate the system response to frequency under primary control alone and synchronized primary and HVAC secondary control. Under primary control only, the system frequency falls from the nominal 60 Hz to around 59.725 Hz, producing a steady-state frequency error of roughly 0.275 Hz. The HVAC resource is used as secondary control, delivering an estimated aggregate response of 40 MW. The resulting frequency deviation is corrected, and the system's frequency is returned to about 60 Hz within about 60 seconds. During the restoration procedure, the demand side resource response achieves a transient peak of about 70 MW, while the entire system frequency has a maximum transient excursion of around 60.20 Hz. The results show that the modeled aggregated resource may offer sufficient secondary frequency support while eliminating the residual steady-state frequency error that remains after the initial thermal generating response. A comprehensive simulation model is developed using MATLAB to validate the efficiency of the proposed strategy. The simulation integrates a coal-based thermal power plant with a robust HVAC model within the framework of load frequency control (LFC). This collective approach improves the active power balance and the operational stability of the grid.
Standalone micro-hydro power plants commonly regulate excess generation through electronic load controllers, which dissipate surplus energy in ballast loads. This study evaluates a dual-inverter variable-frequency-drive framework that prioritizes domestic demand and directs the remaining DC-link power to a motor-pump s...
Muhammad Usman Raza, Muhammad Irfan Abid, W. Pora et al.· Engineering Journal· 0 citations
The increasing penetration of converter-interfaced renewable generation reduces system inertia and heightens the need for fast primary frequency response (PFR). This paper proposes a device-level frequency-temperature droop control framework that enables legacy electric water heaters (EWHs) to provide autonomous PFR us...
Alper Savaşci, Oğuzhan Ceylan, S. Paudyal· 2026 International Conferenc...· 0 citations
In "dual-high" power systems, frequency stability is challenged by declining
rotational inertia. Frequent extreme high-temperature weather has increased the load of inverterbased
air conditioners (IACs), which, along with electric vehicles (EVs), offer significant potential
for frequency regulation due to their the...
Duan-Chao Li, Jin-Dian Lu, Li Zhang et al.· Recent Advances in Electrica...· 0 citations
The high penetration of renewable energy has posed significant challenges to frequency regulation, primarily due to the scarcity of traditional regulation resources in these regions. To address this, a novel secondary frequency regulation control method utilizing voltage-sensitive flexible load (VSFL) clusters is propo...
Huan-Huan Yang, He Huang, Jian-Xin Zhang et al.· Energies· 0 citations
The grid integration of high-proportion new energy leads to frequent fluctuations in grid power and frequency, which raises higher requirements for the AGC variable load regulation performance of thermal power units. Restricted by inherent equipment characteristics, conventional thermal power units fail to meet the dem...
Zhan Li, Jing-Qiu Kang, Fu-You Wang et al.· 2026 6th Power System and Gr...· 0 citations
This paper presents a community energy management system (CEMS) for coordinating flexible residential devices, including electric vehicles (EVs), heat pumps, photovoltaic (PV) systems, and batteries. The framework focuses on demand-side flexibility and voltage support for the local distribution system operator. Device-...