Skip to content

From Melt Breakup To Powder Quality: Linking Atomization Dynamics To Particle Morphology And Size Distribution In Gas-atomized 316L Steel

Oct 2026 · Euro PM2026 Proceedings · 0 citations

Abstract

Gas atomization is a key process for producing metal powders for powder metallurgy and additive manufacturing, where powder size distribution and morphology strongly affect processing and performance. This work examines melt breakup behavior during nitrogen gas atomization of 316L stainless steel and its influence on the resulting powder characteristics, with emphasis on the role of atomization pressure. High-speed imaging and image-based droplet tracking were used to study melt disintegration, ligament formation, and droplet evolution at different nitrogen pressures. The produced powders were characterized and correlated with in-flight observations. The results show that atomization pressure and temperature significantly affect breakup mechanisms and particle size distribution. Variations in pressure and temperature alter the stability, duration, and fragmentation pathways of the melt, leading to systematic changes in powder fineness. The study highlights the importance of understanding melt-gas interactions during atomization and demonstrates that process parameters can be adjusted to tailor powder properties.

View source

Similar papers

Open access Sep 2026

Particle Size Distribution in Hot Gas Atomization of Stainless Steel Melts

The gas atomization process for metal powder production is strongly influenced by the thermodynamic and fluid-dynamic conditions of the atomizing gas. In this study, stainless steel (316L) powders produced using a close-coupled gas atomizer (CCA) with heated nitrogen and argon were investigated. A systematic experiment...

A. Weicht, Flávia Maria Alves Costa da Silva, Stefan Evers et al. · 0 citations
Oct 2026

AM Fabrication Of Tool Steel From Water Atomized Powder Blends By Electron Beam Powder Bed Fusion

Customarily, gas atomized, pre-alloyed metal powders are employed in PBF processes. Transition to water atomized powder has the potential for higher resource efficiency and lower costs. Since steel grades with higher content of alloying elements are often not water atomized, powder blends with master alloys are conside...

Alexander Kirchner, Timo Scharnitzki, T. Studnitzky et al. · 0 citations
Sep 2026

From powder to part: influence of virgin and recovered Inconel 625 powders on the DED-LP processability, microstructure and mechanical properties

The reuse of metal powders in directed energy deposition using laser powder offers promising sustainability benefits for additive manufacturing, yet its impact on part quality remains unknown. This study investigates the influence of powder reuse on the directed energy deposition process of Inconel 625. Virgin powder w...

Romain Deloffre, L. Héraud, J. Lartigau · 0 citations
Oct 2026

Numerical Investigation Of Free-Fall And Close-Coupled Gas Atomization For Metallic Powder Production

Gas atomization is a widely applied industrial route for producing spherical metallic powders for powder metallurgical processing. Powder characteristics strongly influence processing and the final component performance. However, the highly transient and multiphase interactions between high-velocity gas flows and molte...

Yuan-Bin Deng, J. Fischer-Bühner, Christoph Broeckmann · 0 citations
Open access Oct 2026

Ambient-atmosphere ultrasonic atomization of low-melting-point wood’s alloy powders: process optimization, atomization mechanism, and solderability

Low-melting-point alloy powders are crucial for temperature-sensitive electronic packaging. However, preparing quaternary Wood’s alloy powders containing volatile elements (Pb, Cd) via traditional atomization often causes compositional deviation and oxidation. Herein, 13.3Sn–50Bi–26.7Pb–10Cd (wt%) Wood’s alloy powders...

Ding-Ying Ren, Hao-Di Li, Xiao-Feng Yang et al. · 0 citations
Open access Sep 2026

Physicochemical characterization and solidification kinetics of modified Al–Cu–(Ce)-based gas-atomized powders for PBF-LB

Gas atomization is widely used to produce metal powders for Laser Powder Bed Fusion (PBF-LB). The alloy composition and powder characteristics strongly influence processability; hence, analyzing the raw material is essential. This study investigates the physicochemical, microstructural, and solidification features of t...

N. Rojas-Arias, M. Soler-López, F. Coury et al. · 0 citations

We use cookies to run the site and, with your consent, for analytics and to show ads. See our Cookie Policy.