Skip to content
Conference Open access

Comparative Framework for Inter-Turn Short-Circuit Fault-Tolerant Control in EV PMSM Drives

Sep 2026 · 2026 IEEE 22nd International Power Electronics and Motion Control Conference (PEMC) · pp. 1-7 · 0 citations · 20 references

Abstract

Electric vehicle (EV) traction drives are vulnerable to critical electrical machine faults, including inter-turn short circuits (ITSC), which degrade performance and threaten operational safety. Demagnetization is discussed as a related concern, but the main emphasis remains ITSC faults. This paper presents a comparative framework for ITSC fault-tolerant control in EV PMSM drives, reviewing representative methods across compensation-based control (harmonic/negative-sequence current injection, torque reshaping), loss- and thermal-constrained operating-point adaptation, robust nonlinear control, predictive control, and integrated detection-accommodation schemes. The approaches are compared using traction-relevant criteria: torque ripple suppression, current/voltage headroom, efficiency penalty, thermal containment as severity increases, and achievable torquespeed capability. The synthesis reveals a fundamental tradeoff between ripple mitigation and electrical/thermal headroom, demonstrating that severity-aware thermal constraints are essential to prevent fault propagation while preserving traction performance. A major gap in the literature is the lack of validated four-quadrant operation and high-electrical-frequency benchmarking, which limits confidence in field-weakening and high-speed operation in EV applications.

Read PDF

Similar papers

Open access Oct 2026

A Novel Dynamic Configuration for Long-Term Fault-Tolerant Operation of Open-End Winding Induction Motors

This paper presents a novel dynamic configuration for ensuring long-term fault-tolerant operation of three-phase open-end winding induction motors (3P-OEWIM). Conventional strategies are limited by their inability to sustain performance under multiple simultaneous failures, particularly when faults affect both inverter...

M. Belkheiri, A. Beladel, A. Kouzou et al. · 0 citations
Open access Sep 2026

Enhancing PMSM Drive Performance Under Open-Phase Fault Using Fractional-Order Controllers

Open-phase faults (OPFs) represent a major challenge in PMSM drive systems due to the induced current imbalance, torque ripple, and degradation in speed regulation performance. Although fractional-order controllers and model predictive control have been extensively investigated for PMSM drives, their individual applica...

Nada Sayed, Aisha F. Fareed, Emad A. Mohammed et al. · 0 citations
Open access Sep 2026

Third-Order Sliding Mode Fault-Tolerant Control of Parallel Multilevel Inverter-Fed Dual-Star Induction Machine Drives for Sustainable High-Power Applications

The growing demand for sustainable high-power electric drive systems requires advanced control strategies capable of ensuring high efficiency, operational reliability, and continuous service under fault conditions. Parallel multilevel inverter-fed dual-star induction machine (DSIM) drives have emerged as a promising so...

Elyazid Zaidi, Habib Benbouhenni, A. Mabrek et al. · 0 citations
Open access Nov 2026

A generalized model predictive fault-tolerant control strategy for hybrid multilevel converter under arbitrary open-circuit failures

This paper investigates the fault-tolerant (FT) operation of the T-type converter using a cascaded H-bridge (T2C-HB) topology under open-circuit failures (OCF) occurring in any IGBT switch. The high number of switches in the hybrid multilevel converter (HMC) increases the possibility of switch faults. However, existing...

Zheng-Yang Fan, Xiang-Yang Xing, Yang Liu et al. · 0 citations
Open access Sep 2026

Comparison of Zero-Sequence Current Controllers for Open-End-Winding PMSM Drives Fed by a Common DC-Link

Dual-inverter open-end winding permanent-magnet synchronous motor (OEW-PMSM) drives supplied by a common dc-link are attractive for high-performance electric traction thanks to their improved dc-link voltage utilization and enhanced fault tolerance. However, the common dc-link creates a conductive path for zero-sequenc...

Luca Di Cristo, Emanuele Fedele, B. Steyaert et al. · 0 citations

We use cookies to run the site and, with your consent, for analytics and to show ads. See our Cookie Policy.