Skip to content
Preprint

Particle Inertia-Driven Pore Formation over Material Property Effects in Laser Powder-blown Directed Energy Deposition

Sep 2026 · 0 citations · 61 references
Physics

Abstract

Laser Powder-blown Directed Energy Deposition (LP-DED) offers flexibility for process and materials and high productivity (~5 kg/h), but process-induced pores often compromise mechanical properties. This study utilizes in-situ X-ray synchrotron imaging to compare pore formation mechanisms in Ti-6Al-4V (Ti64) and stainless steel 316L (SS316L), focusing on the interplay between particle dynamics and thermophysical properties. Four distinct pore formation mechanisms were identified, with most large pores originating from the closure of cavities formed behind incident particles impinging on the melt pool. High Weber number (We>>1) governs this behavior, indicating that particle inertia, rather than thermophysical property differences, is the primary driver of large pore formation. The study demonstrates that increased energy density leads to larger melt pool volumes, facilitating deeper particle penetration. This greater penetration depth directly correlates with increased pore diameters. While thermophysical properties secondarily influence pore-formation frequency and cavity symmetry, particle inertia remains the dominant factor. These findings provide a physically grounded basis for understanding and controlling porosity in powder-blown DED processes.

View source

Similar papers

Open access Sep 2026

Interaction Regimes and Deposition Mechanisms of Ceramic Particles on Porous Substrates During Cold Spraying

Refractory materials used in thermal reactors are susceptible to degradation because aggressive media penetrate their porous microstructure, while thermo-mechanical loading accelerates material damage. Cold-sprayed ceramic coatings represent a promising approach for surface protection; however, the deposition mechanism...

O. Aleksieieva, A. Toporov, S. Antonyuk · 0 citations
Open access 2026

Effect of deposition variables on solidification behavior and mechanical response of LMD-fabricated Ti-6Al-4V alloy clads

ABSTRACT Laser Metal Deposition (LMD) offers a versatile pathway for near-net-shape fabrication of high-performance titanium components. In this work, Ti-6Al-4V thin-wall structures were fabricated using orthogonally designed experiments to study coupled effects of laser output intensity (800–1400 W), scanning rate (4–...

Sivaramakrishnan Arumugam, Sevvel Pandian, J. Israel et al. · 0 citations
Open access Oct 2026

Influence of particle size and flow conditions on retention in vuggy porous media

This study investigates the effect of particle size and flow conditions on particle retention in vuggy porous media by monitoring the changes in the rock porosity using temporal computed tomography (CT) scans during the injection of a glass bead suspension. Synthetic glass bead cores are fabricated by sintering gla...

Mohammed Ali Saeed, H. Khan · 0 citations
Oct 2026

From Melt Breakup To Powder Quality: Linking Atomization Dynamics To Particle Morphology And Size Distribution In Gas-atomized 316L Steel

Gas atomization is a key process for producing metal powders for powder metallurgy and additive manufacturing, where powder size distribution and morphology strongly affect processing and performance. This work examines melt breakup behavior during nitrogen gas atomization of 316L stainless steel and its influence on t...

Tatiana Fedina, K. Sze, Liviu Brabie et al. · 0 citations
Open access Oct 2026

Pore-Throat-Adaptive Transport and Flow-Redistribution Mechanisms of Deformable Hydrogel Particles in Tight Reservoirs of the Ordos Basin

Tight reservoirs commonly exhibit strong pore-throat confinement and flow heterogeneity, which cause injected water to preferentially migrate through connected high-conductivity pathways while a large fraction of movable fluids remains under-swept. To address this limitation, deformable hydrogel particles (DHPs) with t...

Hong-Guang Li, Hu-Jun Gong · 0 citations
Review Oct 2026

The laser powder bed fusion of particle-reinforced aluminum alloy matrix composites

Laser powder bed fusion (LPBF) enables the fabrication of aluminum matrix particulate composites (AMPCs) with opportunities for microstructural refinement and precipitation strengthening. However, reported mechanical responses remain highly non-monotonic with respect to particle content. Strength improvements are often...

Ying-Ming Zhang, Xiao-Peng Li, Xiao-Ming Wang · 0 citations

We use cookies to run the site and, with your consent, for analytics and to show ads. See our Cookie Policy.